Water Technologies
Maturity
4 / 5
Basis, source, vintage
Deployed at very large scale with mature reverse osmosis; energy and brine remain the constraints.
Source: IDRA/IDA (2024): ~91.5 million m³/day installed global desalination capacity, ~105 million m³/day committed. Modern SWRO with energy recovery runs ~2.5–3.5 kWh/m³ against a ~0.9 kWh/m³ thermodynamic minimum; RO is ~69% of installed capacity; thermal MSF/MED ~10–16 kWh/m³ (2024)
What it is
Desalination, treatment, reuse, leak detection and precision irrigation — the engineering of making water available where and when it is needed.
What it does
It addresses a megatrend that had no technological enabler in this Compendium until Rev 23. Water scarcity is frequently a distribution, loss and treatment problem before it is an absolute shortage.
Common misconception
That desalination solves scarcity. It is energy-intensive, coastal, and produces brine; leak reduction and reuse are usually cheaper per cubic metre and are chronically underfunded.
Steepens
- Food System Transformation — large
- Water Security — large
- Climate Resilience Imperative — moderate
- Pollution and Waste Burden — moderate
- The Built-Environment Deficit — moderate
What would change its gradient
- Energy cost, which determines desalination viability
- Tariff structures that make loss reduction pay
- Public acceptance of potable reuse, which is a human enabler and the binding one in several countries
Shares megatrends with
- Biomaterials & Biofabrication
- Consumption Norms
- Internet of Things
- Sensors & Earth Observation
- AgTech
- Alternative Proteins & Precision Fermentation
In the book
Why the Future Arrives Unevenly — Ch. 8 — The Rebuild of the Physical Base · Ch. 9 — The Closing of the Planetary Envelope
Sources
- Deployed at very large scale with mature reverse osmosis; energy and brine remain the constraints. Source: IDRA/IDA (2024): ~91.5 million m³/day installed global desalination capacity, ~105 million m³/day committed. Modern SWRO with energy recovery runs ~2.5–3.5 kWh/m³ against a ~0.9 kWh/m³ thermodynamic minimum; RO is ~69% of installed capacity; thermal MSF/MED ~10–16 kWh/m³ (2024).